Năm | Tên bài báo | Tên tác giả | Tên tạp chí | Phân loại | ||||||||
2017 | Analytical homogenization for stretch and bending of honeycomb sandwich plates with skin and height effects | Yu Ming LI , Minh Phuc HOANG | Composite Structures; Volume 120, Pages 406-416 | SCI/Scopus | ||||||||
2017 | Designing the Adaptve Tracking Controller for Uncertain Fully- Actuated Dynamical Systems with Additive Disturbances based on Sliding Mode | Nguyễn Văn Chí | Journal of Control Science and Engineering, Volume 2016 | SCI/Scopus | ||||||||
2017 | "Study of fuzzy control for cab’s isolation system of heavy truck" | Nguyen Van Liem,Zhang Jianrun, Le Van Quynh, Jiao Renqiang, Liao Xin, | ,Vibroengineering PROCEDIA, Vol. 10, 2016, p. 309‑314/Scpous | SCI/Scopus | ||||||||
2017 | “An improved genetic algorithm for multidimensional optimization of precedence-constrained production planning and scheduling”, | Dao S.D., Abhary K., Marian R | Journal of Industrial Engineering International, vol. 13, no. 2, pp. 143–159. (Scopus, Springer) | SCI/Scopus | ||||||||
2017 | “Optimisation of assembly scheduling in VCIM systems using genetic algorithm”, | Dao S.D., Abhary K., Marian R | Journal of Industrial Engineering International, DOI: 10.1007/s40092-017-0183-0 (Scopus, Springer) | SCI/Scopus | ||||||||
2017 | An extension of the equivalent linearziation method using a weighted averaging to design of TMD for damped linear systems | Vũ Ngọc Pi, Phan Quang Thế, Nguyễn Đức Tường, Lý Việt Anh, Lê Xuân Tuấn | Applied Surface Science | SCI/Scopus | ||||||||
2017 | Modelling of the degradation of mechanical properties of high-density polyethylene based-packaging exposed to amyl acetate solution | Trần Ngọc Giang | Polymer Testing (ELSEVIER), Vol.59 (2017) 449-461 | SCI/Scopus | ||||||||
2017 | An optimization model for distrbution system reinforcement-integrated uncertainties of photovoltaic systems | Vũ Văn Thắng | Elctrical Engineering ( DOI 10.1007/s00202-017-0533-3) | SCI/Scopus | ||||||||
2017 | The effect of inertial mass and excitation frequency on a Duffing vibro-impact drifting system | Nguyễn Văn Dự, Dương Thế Hùng, Chu Ngọc Hùng và Ngô Quốc Huy | Elsevier - International Journal of Mechanical Sciences; ISI, Vol. 124–125, Pages 9–21; DOI: 10.1016/j.ijmecsci.2017.02.023; | SCI/Scopus | ||||||||
2017 | "Performance analysis of air suspension system of heavy truck with semi-active fuzzy control" | Nguyen Van Liem,Zhang Jianrun, Le Van Quynh, Jiao Renqiang | ,Journal of Southeast University (English Edition), Vol.33, No.2, 2017/Scopus | SCI/Scopus | ||||||||
2017 | Chemical metallization of KMPR photoresist polymer in aqueous solutions | Gul Zeb, Xuan Truong Duong, Ngoc Pi Vu, Quang The Phan , Duc Tuong Nguyen , Viet Anh Ly, Siamak Salimy , Xuan Tuan Le,∗ | Applied Surface Science; 407 (2017) 518–525; Accepted 27 February 2017 | SCI/Scopus | ||||||||
2017 | Optimal Allocation and Sizing of Capacitors for Distribution Systems Reinforcement Based on Minimum Life Cycle Cost and Considering Uncertainties | Vũ Văn Thắng, Ngô Đức Minh | The Open Electrical & Electronic Engineering Journal https://benthamopen.com/ABSTRACT/TOEEJ-11-165/ | SCI/Scopus | ||||||||
2017 | Performance of Al2O3 nanofluids in minimum quantity lubication in hard milling of 60Si2Mn steel using cemented carbide tools | Trần Minh Đức, Trần Thế Long | Advances in Mechanical Engineering Vol.9(7)1-9 DOL: 10.1177/1687814017710618 | SCI/Scopus | ||||||||
2017 | ATOMISTIC SIMULATION OF BORON NITRIDE NANOTUBES UNDER BENDING | Nguyễn Văn Trang | Hội thảo quốc tế ACOME 2017, In tại nhà xuất bản Springer http://icacome.org/tin-tuc/conference-program-of-acome-2017-71.html | SCI/Scopus | ||||||||
2017 | Analysis and simulation for the double corrugated cardboard plates under bending and in-plane shear force by homogenization method | Dương Phạm Tường Minh | International Joural of Mechanics, 11, pp. 176-181,. | SCI/Scopus | ||||||||
2017 | Effects of various defects on the mechanical properties of black phosphorene | Nguyễn Văn Trang | Superlattices and Microstructures (ELSEVIER) http://www.sciencedirect.com/science/article/pii/S074960361731738X https://doi.org/10.1016/j.spmi.2017.09.021 | SCI/Scopus | ||||||||
2017 | Comparing the performance of suspension system of heavy truck with two air suspension systems. Vibroengineering PROCEDIA | Van Quynh Le | Vibroengineering PROCEDIA, Vol. 14, 2017, p. 220‑226. | SCI/Scopus | ||||||||
2017 | Influence of semi-trailer truck operating conditions on road surface friendliness | Van Quynh Le | Vibroengineering PROCEDIA, Vol. 16, pp. 128‑134 | SCI/Scopus | ||||||||
2017 | Optimization Cutting Fluids and Parameters for minimizing cutting force in fly-hobbing | Ngô Minh Tuấn, Hoàng Vị | Journal of Engineering and Applied Sciences, 20, 5212-5218 | SCI/Scopus | ||||||||
2017 | CCS: Energy-Efficient Data Collection in Clustered Wireless Sensor Networks Utilizing Block - wise Copressive Sensing | Minh Tuan Nguyen, Keith ATeague, Naazanin Rahnavard | Computer Networks - ScienceDirect Elsevier | SCIE | ||||||||
2017 | Energy hub modeling to minimize residential energy costs considering solar energy and BESS | Vũ Văn Thắng | Journal of Modern power Systems and Clean Energy ( DOI 10.1007/s40565-017-0281-4) | SCIE | ||||||||
2017 | Energy hub modeling to minimize residential energy costs considering solar energy and BESS | Thanh tùng HA, Yongiun ZHANG V.V. THANG, Jianang HUANG |
Journal of Modern power Systems and Clean Energy ( DOI 10.1007/s40565-017-0281-4) | SCIE | ||||||||
2017 | , Tolerance design of robot parameters using generalized Reduced Gradient algorithm; | Trang Thanh Trung, Li Wei Guang and Pham Thanh Long | International journal of materials, Mechanics and manufacturing, ISSN 1793 – 8198. Vol.5 N02 | SCIE | ||||||||
2017 | Adaptive Feedback Linearization Control for Twin Rotorb Multiple-input Multiple-output System | Nguyễn Văn Chí | Internatinal Journal of Control, Automation and Systems 15(3) (2017) 1267-1274 http://dx.doi.org/10.1007/sl 2555-015-0245-2 |
SCIE | ||||||||
2017 | “A bibliometric analysis of genetic algorithms throughout the history”, | Dao S.D., Abhary K., Marian R. | Computers & Industrial Engineering, vol. 110, pp. 395–403 (SCIE, Elsevier) | SCIE | ||||||||
2017 | Performance of Al2O3 nanofluids in minimum quantity lubrication in hard milling of 60Si2Mn steel using cemented carbide tools | Duc Tran Minh, Long Tran The and Ngoc Tran Bao | Advances in Mechanical Engineering 2017, Vol. 9(7) 1–9 The Author(s) 2017 DOI: 10.1177/1687814017710618 journals.sagepub.com/home/ade |
SCIE | ||||||||
2017 | The Equivalent Linearization Method with a Weighted Averaging for Analyzing of Nonlinear Vibrating Systems | Đặng Văn Hiếu | Latin American Journal of Solids and Structures | SCIE | ||||||||
2017 | A New Design of Horizontal Electro-Vibro-impact Devices | Nguyễn Văn Dự, Nguyễn Hữu Công, Ngô Như Khoa và La Ngọc Tuấn | Journal of Computational and Nonlinear Dynamics; ASME (ISI, DOI: 10.1115/1.4035933; | SCIE | ||||||||
2017 | Adaptive sliding mode tracking control for Twin rotor multiple-input multiple- output nonlinear system | Nguyễn Văn Chí | International Journal of Control, Automation and Sustems ( IJCAS) Volume 04, Number 04 (Octpber 2015), (Online) | |||||||||
2017 | Investigation of Nanofluids as Potential Cuting Fluids in Gear Hobbing Processes of AISI 4118 Steel | Hoàng Vị, Ngô Minh Tuấn, Trần Thế Long | Journal of Mechanics Engineering and Automation | |||||||||
2017 | A New Method to Solve the Kinematic Problem of Parallel Rbots Using General reduce Gradient algorithm | Phạm Thành Long, Trang Thành Trung Li Wei Guang |
Journal of Robotiic and Mechatronic. vol 28- No3, trang 404 | |||||||||
2017 | An extension of the equivalent linearziation method using a weighted averaging to design of TMD for damped linear systems | Đặng Văn Hiếu | The 4th International Conference on Engineering Mechanics and Automation (ICEMA-4) - p. 245-250 | |||||||||
2017 | An application of Genetic Fuzzy System in Active Queue Management for TCP/IP multiple congestion networks | Nguyễn Phương Huy, Dương Thị Mai Hương, Dương Thu May | International Journal of Engineering and Applied Sciences (IJEAS) | |||||||||
2017 | A Forecasing Model Based on K-Means Clustering and Time Invariant Fuzzy Relationship Groups | Nghiêm Văn Tính, Nguyễn Công Điều Nguyễn Thị Hương |
Journal of Multidisciplinary Engineering Science Studies ( JMESS) | |||||||||
2017 | Deploing battery Capcity Basing on the Distribution of Power Flows in Hybrid Photovoltaic and Wind Generations Operting in Half-Isolation Mode | Lê Tiên phong, Ngô Đức Minh | International Journal of Engineering Research & Technology ( IJERT) Vol. 5 Issue 08, August 2016 | |||||||||
2017 | Design of electronic throttle valve position control system using Learing Feed-Forward based on Model Reference Adaptive Systems controller | Trần Quế Sơn, Đặng Thị Ngọc Ánh | International Journal of Engineering and Applied Sciences (IJEAS; (ISSN 2394-3661) | |||||||||
2017 | Determine Battery Capacity Basing on the Distrbution of Power Flows in Hybrid Photovoltaic and wid Generations Operating in Half-Isolation Mode | Lê Tiên Phong, Ngô Đức Minh | International Journal of Engineering Research & Technology (IJERT) Vol.5 Issue 08, August-2016 | |||||||||
2017 | A Forecasing Model Based on K-Means Clustering and Time Invariant Fuzzy Relationship Groups | Nghiêm Văn Tính, Nguyễn Thị Hương | Journal of Multidisciplinary Engineering Science Studies ( JMESS) | |||||||||
2017 | A forecasting method based on combining technique and fuzzy relationship groups | Nghiêm Văn Tính | International Research journal of Engineering and Technology | |||||||||
2017 | A Hybrid Forecasiting Model Based on Automatic Clustering Algorithm and Fuzzy Time Series | Nghiêm Văn Tính, Nguyễn Thị Phương Nhung | Journal of Multidsciplinary Engineering Science Studies ( JMESS) | |||||||||
2017 | A Two-Stage optimization Model for Distribtion System Planning Integrted Distributed Generaton | Vũ Văn Thắng, Hà Thanh Tùng, Bach Quoc Khanh |
Journal of Science and Technology of Energy Sources | |||||||||
2017 | CCS: Energy-Efficient Data Collection in Clustered Wireless Sensor Networks employing Distributed DCT | Nguyễn Tuấn Minh, Keith A Teague | International Journal of Wireleless & Mobile Networks (IJWMN) | |||||||||
2017 | Noise Cancellation Methods for Wearable Devices using Microprocessors | Tan D. Vu, Trung T. Tran, Hoa T. Tran, Minh T.Nguyễn | International Journal of Wireleless and Electronics Engineering (SSRG-IJEEE) | |||||||||
2017 | Three-Wire network: A new powe supply for smart building with demand management systems | Nguyễn Minh Ý | American Journal of Engineering Research | |||||||||
2017 | Deploing State Space Control to regulate an Inverted Rotary Pendukum With non-zero input | Bùi Hoàng Dũng | International Research Journal of Engineering anh Technology | |||||||||
2017 | Optimum Determination of Three-Step Helical Gearboxes for Getting Minimum cross section Dimention | Nguyễn Khắc Tuân, Vũ Ngọc Pi | Journal of Environmental Science and Engineering A (2016) | |||||||||
2017 | Study on Implementation of Hedge Algebra Based Controller in Real Systems | Trung Kien Ngo, Cong Huu Nguyễn, Tan Đuc Vu | SSRD International Journal of Elecetrical and Electronics Engineering (SSRG-IJEEE)- Paper ID: IJEEE-V3I11P103, Volume 3 Issue 11. Paper LinK | |||||||||
2017 | Applying Fuzzy Fp-Treeto Mine Fuzzy Assocition Rules Using Hedge Algebras Based Approach | Nguyễn Tiến Duy, Lâm Hùng Sơn , Nghiêm Văn Tính | Journal of Multidisciplinary Engineering Science Studies (JMESS) Vol 2, Issue 12 | |||||||||
2017 | Cost Optimization of Interenal Grinding | Vũ Ngọc Pi, Lưu Anh Tùng, Lê Xuân Hưng | Journal of Materials Science and Engineering B (2016); Tr 291-296 | |||||||||
2017 | Cost OptimiZation of Surface Grinding proceess | Vũ Ngọc Pi, Lưu Anh Tùng, Lê Xuân Hưng, Banh Tien Long | Journal of Environmental Science and Engineering A (2016) | |||||||||
2017 | Exact Linearization Control for Twin Rotor MIMO System | Đinh Văn Nghiệp, Nguyễn Như Hiển, Vũ Đức Tân, Nguyễn Thị Mai Hương, Nguyễn Tuấn Minh | International Journal of Electrical and Electronics Engineering (SSRG-IJEEE)-volume 3 Issue 12- December 2016 | |||||||||
2017 | Investigation of Different Geometrics of an Air-Cooled Heat SinK for Temperature Reduction by Using Finite ELement Analysis | Hoàng Tiến Đạt, Patrick Petzka | IOSR Journal of Engineering (IOSRJEN), www.iosrjen.org ISSN (e): 2250-3021, ISSN (p): 2278-8719, Vol. 06, Issue 12 (December. 2016), ||V1|| PP 29-35 |
|||||||||
2017 | Optimum Calculation of Partial Transmission Ratios of Mechanical Driven systems Using a V-belt and a Two-step bevel Helical Gearbox | Nguyễn Khắc Tuân, Vũ Ngọc Pi, Nguyễn T.Hồng Cẩm | Journal of Environmental Science and Engineering A (2016) | |||||||||
2017 | Forecasting Model for Enrolment Comnining Weighted Fuzzy and Fourier Time Series and Fourier Series Transform | Nguyễn Tiến Duy, Nghiêm Văn Tính | Journal of Multidisciplinary Engineering Science Studues ( Vol3, Issue 1, 1276-1281) | |||||||||
2017 | “Design on controllers for electrical appliances in smart home”, | Tran Que Son, Tran Manh Tuan, Le Van Hoan, Phung Thanh Hai, Nguyen Minh Y (2017), | International Journal of Smart Grid and Clean Energy, 6(2), tr. 90–95.2017 | |||||||||
2017 | A Distributed Time Triggered Control For a Feedback Control System | Bùi Hoàng Dũng | International Research Journal of Enfineering and Technology | |||||||||
2017 | Applying Pade Approximation Model in Optimal Control Problem for a Distributed Parameter System with Time Delay | Mai Trung Thai, Nguyen Huu Cong, Nguyen Van Chi, Vu Van Dam |
International Journal of Computing and Optimization Vol. 4, 2017, no. 1, 19 - 30 HIKARI Ltd, www.m-hikari.com https://doi.org/10.12988/ijco.2017.61227 |
|||||||||
2017 | Inproving Efficiency and Response of Photovoltaic Power Generation with DC/DC Buck Converter | Lê Tiên Phong, Ngô Đức Minh | International Journal of Engineering Research & Technology (IJERT) Vol.6 Issue 03, March-2017 | |||||||||
2017 | A method to solve optimization problem in Model Predictive Control for Twin Rotor MIMO System using Modified Genetic Algorithm | Mai Trung Thái, Nguyễn T. Mai Hương | International Journal of Computing and Optimization Vol. 4, 2017, no.1, 31-41 HIKARILtd, www.m-hikari.com |
|||||||||
2017 | Control design for axial flux permanent magnet synchrononous motor which operrates above the nominal speed | Trần Xuân Minh, Nguyễn Như Hiển, Dương Quốc Tuấn | Advances in Science, Technology and Engineering Systems Journal, Vol.2, No.3,PP153-159 | |||||||||
2017 | Designing the automatic train alarm system at the railway intersection | Nguyễn Hoàng Việt, Lê Thị Huyền Trang, Phan Thanh Hiền | International Journal of Engineering and Applied Sciences | |||||||||
2017 | Forecasting Enrollment Based on the Number of Recurrences of Fuzzy Relationships and K-Means Clustering | Nghiêm Văn Tính | Journal of Multidisciplinary Engineering Science Studues | |||||||||
2017 | "Energy-Efficient Mobile Sensing in Distributed Multi-Agent Sensor Networks", | M. T. Nguyen | Advances in Science, Technology and Engineering Systems Journal, vol. 2, no. 3, pp. 245-253 (2017). | |||||||||
2017 | An optimization model for distribution system planning integrated photovoltaic | Vũ Văn Thắng | INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENT https://www.ijee.ieefoundation.org/ | |||||||||
2017 | Combination of Receding Horizon Control and LQR for Twin Rotor MiMO System | Nguyễn T. Mai Hương, Nguyễn Thị Phương | SSRG International Journal of Electrical and Electronics Engineering (tập 4, số 5, tr 23-26) | |||||||||
2017 | Energy-Efficient Mobile Sesing in Distributed Multi-Agent Sensor Networks | Nguyễn Tuấn Minh | Advances in Science, Technology and Engineering Systems Journal | |||||||||
2017 | Reseach on Applying Nano Cutting Oils in Spur Gear Hobbing Process | Ngô Minh Tuấn, Hoàng Vị | World Journal of Engineering and Technology, 2017,5, 286-298 | |||||||||
2017 | The Factors Affecting Green Supply Chains: Empirical Study of Agricultural Chains in Vietnam |
Thị Mai Yến Phạm, Thị Minh Khuyên Phạm | Journal of Management and Sustainability; Vol. 7, No. 2; 2017, ISSN1925-4725 E-ISSN 1925-4733 |
|||||||||
2017 | Tolerance desingn of robot parameters using generalized algorithm | Phạm Thành Long, Trang Thành Trung Li Wei Guang |
International Journal of materials, Mechanics and manufctring, vol.5 No2; trang 96 | |||||||||
2017 | A Design of Fuzzy Sliding Mode Controller for DC Motor Drive Base on FPGA | Bùi Thị Hải Linh | SSRG International Journal of Electronics and Communication Engineering (SSRG-IJECE) (Volume 4, Number 6 June issue) | |||||||||
2017 | A Study on Modelling Surface Finish in Electrical Discharge achining Tablet Shape Punches Using Response Using Response Surface Methodology | Vũ Ngọc Pi, Lê Xuân Hưng, Trần Thanh Hoàng | Journal of Environmental Science and Engineering B (2017) 387-390 | |||||||||
2017 | Experimental Determination of Optimum Exchanged Diameter in Surface Grinding Process | Vũ Ngọc Pi, Lưu Anh Tùng, Lê Xuân Hưng, Nguyễn Văn Ngọc | Journal of Environmental Science and Engineering A 6 (2017) 85-89. DAVID PUBLISHING | |||||||||
2017 | Optimum Determination of Partial ransmission Ratios of echanical Driven Systems Using a V-belt and a Helical Gearbox with Second-Step Double Gear-Sets | Vũ Ngọc Pi, Nguyễn Khắc Tuân | Journal of Environmental Science and Engineering A (2017) 377-380 | |||||||||
2017 | Optimum Determination of Partial Transmission Ratios of Mechanical Driven Systems using a Chain Drive and a Two-step Helical Gearbox | Vũ Ngọc Pi, Trần Thị Phương Thảo, Đặng Anh Tuấn | Journal of Environmental Science and Engineering B 6 (2017) 80-83. DAVID PUBLISHING | |||||||||
2017 | Optimum Determination of Partial Transmission Ratios of Mechanical Driven Systems Using a V-belt and a Three-Step Helical Gearbox | Đặng Anh Tuấn, Nguyễn Khắc Tuân, Vũ Ngọc Pi | Journal of Environmental Science and Engineering B 6 (2017) 328-331. DAVID PUBLISHING | |||||||||
2017 | A Simple Control Method for Exoskeleton for Rehabilitation |
Đỗ Trung Hải | SSRG International Journal of Electrical and Electronics Engineering (SSRG-IJEEE) – Volume 4 Issue 8 – August 2017 | |||||||||
2017 | An Intelligent Control for Lower Limb Exoskeleton for Rehabilitation | Đỗ Trung Hải | SSRG International Journal of Electrical and Electronics Engineering (SSRG-IJEEE) – Volume 4 Issue 8 – August 2017 | |||||||||
2017 | Design of Sugeno fuzzy logic controller for Resistance furnace | Nguyễn Tiến Duy | Journal of Multidisciplinary Engineering Science Studies (JMESS) ISSN: 2458-925X Vol. 3 Issue 8, August - 2017 | |||||||||
2017 | Optimal design of a micro-drill from the aspect of vibration analysis | Hoàng Tiến Đạt | International Journal of Computer Assisted Methods in Engineering and Science, Poland | |||||||||
2017 | A Proposed Model For Forecasting Stock Markets Based On Clustering Algorithm And Fuzzy Time Series | Nghiêm Văn Tính | Journal of Multidisciplinary Engineering Science Studies (JMESS). Vol 3, Issue 9, 2128-2133 | |||||||||
2017 | Implementation of English flipped classrooms: Students' perceptions and teacher's reflection | Nguyễn Thị Kim Thương | International Journal of Research Studies in Language Learning", Volume 7, Number 3, p.87-108 | |||||||||
2017 | Modeling and numerical simulation for the double corrugated cardboard under transverse loading by homogenization method | Dương Phạm Tường Minh | The International Journal of Engineering and Science (IJES), 6(9), pp.16-25, | |||||||||
2017 | Modelling Surface Finish in Electrical Discharge Machining Tablet Shape Punches using Response Surface Methodology | Trần Thanh Hoàng, Trần Anh Đức, Nguyễn Mạnh Cường, Lưu Anh Tùng, Lê Xuân Hưng, Vũ Ngọc Pi | SSRG International Journal of Mechanical Engineering (SSRG-IJME) – volume 4 Issue 9 September 2017 | |||||||||
2017 | Numerical modeling to determine the mechanical behavior of polyurethane foams | Dương Phạm Tường Minh, Lương Việt Dũng | International Journal of Reseach in Engineering and Science (IJRES), 5(10), pp. 17-22 | |||||||||
2017 | Improving enterprise customers' satisfaction to develop credit service of commercial banks in Thai Nguyen province, Viet Nam | Ngô Thúy Hà, Phạm Thị Minh Khuyên, Nguyễn Thị Kim Huyền | SSRG International Journal of Economics and Management Studies (SSRG-IJEMS)- Volume 4 Issue 11 - November 2017, page 8-16 | |||||||||
2017 | A Real-time Operation Scheme of Microgrids with Distributed Generation in Electricity Markets | Nguyễn Minh Ý | American Journal of Electrical and Electronic Engineering, 5(5), 189-194 | |||||||||
2017 | Applied Research of Nanofluids in MQL to Improve Hard Milling Performance of 60Si2Mn Steel Using Carbide Tools | Trần Thế Long, Trần Minh Đức, Phạm Quang Đồng | American Journal of Mechanical Engineering Vol.5(5) 228-233 | |||||||||
2017 | DP Formulation for Distribution System Planning Considering Distributed Energy Resources and Market Environments | Nguyễn Minh Ý | International Transaction of Electrical and Computer Engineers System, 4(2), 62-67. | |||||||||
2017 | Using Extended Kalman Filter to Observe State Parameters of the Twin Rotor MIMO System in Order to Install Model Predictive Control Algorithm Based Phisical Model | Nguyễn Thị Mai Hương | SSRG International Journal of Electrical and Electronics Engineering (SSRG-IJEEE) Your Paper ID: IJEEE-V4I12P101 Volume-4 Issue-12, page 1-7, 2017 http://www.internationaljournalssrg.org/IJEEE/V4I12P101.html | |||||||||
2016 | Investigation of MQL-Employed Hard- Milling Process of S60C Steel Using Coated-Cermented Carbide Tools; |
Tran Minh Duc and Tran The Long | Journal of Mechanics Engineering and Automation, Volume 6, Number 3, March 2016; |
|||||||||
2016 | Improving semi-supervised clustering by active learning | Viet-Vu Vu, Nicolas Labrocheb | Intelligent Data Analysis - An International Journal | |||||||||
2016 | Fractal Geometry Analysis of Tool Wear Based on Wear Volume Lost during a Machining Process | D. Xuan-Truong, M. Balazinski, R. Mayer | Journal of Chaos, Solutions & Fractals | |||||||||
2016 | Optimization of Initial Cutting Parameters during Machining of Titanium Metal Matrix Composite (TiMMCs) | D. Xuan-Truong, M. Balazinski, R. Mayer | International Journal of Machine Tools and Manufacture | |||||||||
2016 | Correcting intensity loss errors in the absence of texture-free reference samples during pole figure measurement | Ahmed A. Saleh, Viet Q. Vu, Azdiar A. Gazder | Materials Characterization, ISSN 1044-5803, June, 2016 | |||||||||
2016 | Designing adaptive current controller for two axial flux permanent magnet synchronous motors connected by one shaft | Trần Xuân Minh, Nguyễn Như Hiển, Dương Quốc Tuấn | International Journal of Electrical and Electronics Engineering (SSRG-IJEE), Trang 172- 177, Volume 3, Issue 5, May 2016, ISSN 2348-8379 |
|||||||||
2016 | A New Method to Solve the Kinematic Problem of Parallel Robots Using General reduce Gradient algorithm | Trang Thanh Trung, Li Wei Guang and Pham Thanh Long | Journal of Robotic and Mechatronics. Vol 28 - N03, 15-4/2016. | |||||||||
2016 | A novel approach to solving the optimal power flow problem based on particle swarm optimization | Nguyen Minh Y, Tran Thi Quy Anh | International Journal of Electrical and Electronic Engineering, Vol. 5, No. 1, pp. 1-9 | |||||||||
2016 | A new framework of demand response for household customers based on advanced metering infrastructure under smart grids | Minh Y Nguyen, Duc M. Nguyen | Electric Power Components and Systems,Vol. 44, No. 2, pp. 165-171 | |||||||||
2016 | The efficiency analysis of different combined cycle power plants based on the impact of selected parameters | Tien-Dat Hoang, Daniel Kazimierz Pawluskiewicz | International Journal of Smart Grid and Clean Energy, vol. 5, no. 2, ISSN 2373-3594 | |||||||||
2016 | Coupled lateral and torsional vibration of the micro-drill spindle systems, | An-Chen Lee, Tien-Dat Hoang, | International journal of Advanced Manufacturing Technology (Accepted in January 31, 2016, SCIE). | |||||||||
2016 | CCS: Energy-Efficient Data Collection for Clustered Wireless Sensor Networks utilizing Block-wise Compressive Sensing | M. T. Nguyen, K. A. Teague and N. Rahnavard | ScienceDirect ELSEVIER Computer Network (COMNET). Volume 106, 4 September 2016, Pages 171–185 | |||||||||
2016 | Compressive Sensing Based Random Walk Routing in Wireless Sensor Networks | M. T. Nguyen and K. A. Teague | ScienceDirect ELSEVIER Ad-hoc Networks | |||||||||
2016 | Energy-Efficient Data Collection in Clustered Wireless Sensor Networks employing Distributed DCT | M. T. Nguyen, K. A. Teague | Wireless Communications and Mobile Computing | |||||||||
2016 | Data collection algorithms in Wireless Sensor Networks employing | M. T. Nguyen, K. A. Teague | Compressive Sensing: A Survey | |||||||||
2016 | Compressive Wireless Mobile Sensing | M. T. Nguyen, K. A. Teague | ScienceDirect ELSEVIER Information Processing Letters | |||||||||
2016 | Stochastic-Based Power Consumption Analysis for Data Transmission in Wireless Sensor Networks | M. T. Nguyen, K. A. Teague | Wireless Communications and Mobile Computing | |||||||||
2015 | A simple method for identifying parameter correlations in partially observed linear dynamic models | P. Li, Q. D. Vu | BMC Systems Biology, 2015, 9:92(SCI) | |||||||||
2015 | Hybrid PI controller design and hedge algebras for control problem of dissolved oxygen in the wastewater treatment system using activated sludge method | Fei Luo, Lâm Hoàng Bình, Nguyễn Tiến Duy, Nguyễn Phương Huy |
International Research Journal of Engineering and Technology(IRJET); ISSN: 2395-0056 | |||||||||
2015 | A New Concept for Tool Wear during Machining Process Based on Characteristics of Chaos Theory | D. Xuan-Truong, M. Balazinski, R. Mayer | Journal of Materials Processing Technology; (2015); Ref. No.: PROTEC-S-16-00177 | |||||||||
2015 | Initial Tool Wear Behaviour during Machining of Titanium Metal Matrix Composite (TiMMCs) | D. Xuan-Truong, M. Balazinski, R. Mayer | International Journal of Refractory Metals and Hard Materials (2015) IJRMHM_60_Original_V0 | |||||||||
2015 | Asset evaluation of Photovoltaic systems in residential applications in Vietnam | Bui Huy Binh, Nguyen Trong Giap, Nguyen Minh Y | International Research Journal of Engineering and Technology, Vol. 2, No. 3, pp. 1-8 | |||||||||
2015 | A generalized formulation of demand response under market environments | Minh Y Nguyen, Minh D. Nguyen | International Journal of Emerging Electric Power Systems, Vol. 6, No. 2, pp. 217–224 | |||||||||
2015 | Random Walk based Data Collection in Mobile Sensor Networks utilizing Compressed Sensing | M. T. Nguyen and K. A. Teague | International Journal of Complex Systems – Computing, Sensing and Control - Vol. 3, No.2, pp. 107-117, Dec. 2015 Copyright © 2015, TSI® Press Printed in the USA. | |||||||||
2015 | The efficiency analysis of different combined cycle power plants based on the impact of selected parameters, |
Tien-Dat Hoang, Daniel Kazimierz Pawluskiewicz | International Journal of Smart Grid and Clean Energy, ISSN 2315-4462 (Accepted in December 2015, EI). |
|||||||||
2015 | Vibration characteristics analysis of the multi- impeller shaft system using ANSYS |
Tien-Dat Hoang, Anh-Ngoc Vu | Vietnam Mechanical Engineering Journal, ISSN 0866-7056, no. 12, pp. 63-67, 2015. |
|||||||||
2015 | Depth of Cut per Abrasive in Fixed Diamond Wire Sawing | Chung, C. and Nhat, L. V. | International Journal of Advanced Manufacturing Technology, Vol. 80, No. 5, pp 1337-1346 | |||||||||
2015 | Linear Parameter Varying Control of Doubly Fed Induction Machines | H. Nguyen Tien, C. W. Scherer, J. M. A. Scherpen, Volkmar Mueller | IEEE Transactions on Industrial Electronics, Issue: 99 | |||||||||
2015 | MRAS Based LFFC for a Two-Link Rigid Robot Arm, , Volume 3, Number 3, June 2015 | Tran Xuan Minh, Nguyen Duy Cuong | Journal of Automation and Control Engineering | |||||||||
2015 | Model reduction based on triangle realization with pole retention | Cong Huu Nguyen, Kien Ngoc Vu, Hai Trung Do | Applied Mathematical Sciences, Vol. 9, 2015, No. 44, pp. 2187-2196 | |||||||||
2015 | Digital Hardware Realization of Forward and Inverse Kinematics for a Five-Axis Articulated Robot Arm | Bui Thi Hai Linh (1) Ying-Shieh Kung(2) | Mathematical Problems in Engineering | |||||||||
2015 | Depth of cut per abrasive in fixed diamond wire sawing | Chunhui Chung, Le Van Nhat | International Journal of Advanced Manufacturing Technology, Volumn 78, Numbers 1-4 | |||||||||
2015 | High strain rate behavior of Graphene reinforced polyurethane composites | Sanjeev K.Khanna, Phan Thi Thu Ha | Journal of Engineering Materials and Technology, Vol. 137 | |||||||||
2015 | Direct MRAS based an Adaptive control systems for a Two - Wheel mobile robot | Nguyen Duy Cuong, Gia Thi Dinh, Tran Xuan Minh | Journal of Automation and control Engineering, Volumn 3, Number 3 | |||||||||
2015 | MRAS based LFFFC for a Two - Link Rigid robot Arm | Nguyen Duy Cuong, Tran Xuan Minh | Journal of Automation and control Engineering, Volumn 3, Number 3 | |||||||||
2015 | An efficient method for active semi-supervised density based clustering | Nguyen Huu Cong, Vu Ngoc Kien, Do Trung Hai | Applied Mathematical Sciences, Vo.9, 2015, No.44, 2187 - 2196; HIKARI Ltd, www.m-hikari.com | |||||||||
2015 | An efficient method for active semi-supervised density based clustering | Vu Viet Vu | International Journal of Advances in Computer Science and Technology (IJACST), Vol.4,No.4 | |||||||||
2015 | A Generalized Formulation of Demand Response under Market Environments |
Minh Y Nguyen* and Duc M. Nguyen | Int. J. Emerg. Electr. Power Syst. 2015; aop | |||||||||
2015 | "Asset evaluation of Photovoltaic systems in residential applications in Vietnam" | Bui Huy Binh, Nguyen Trong Giap, Nguyen Minh Y | International Research Journal of Engineering and Technology, Vol. 2, No. 3, pp. 1-8 | |||||||||
2014 | Chaotic Tool Wear During Machining of Titanium Metal Matrix Composite (TiMMCs) | D. Xuan-Truong, M. Balazinski, R. Mayer | ASME 2014 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2014, pp. V02BT02A018-V002BT002A018 |
|||||||||
2014 | Profit Optimization of External Cylindrical Grinding | Vu Ngoc Pi, Banh Tien Long, Vu Hong Khiem and Nguyen Hong Quan |
Journal of Environmental Science and Engineering B, Volume 3, Number 5, May |
|||||||||
2014 | Real-Time Wavelet-Based Coordinated Control of Hybrid Energy Storage Systems for Denoising and Flattening Wind Power Output | Tran Thai Trung 1 , Seon-Ju Ahn 1,*, Joon-Ho Choi 1 , Seok-Il Go 1 and Soon-Ryul Nam 2 |
Energies ISSN 1996-1073 www.mdpi.com/journal/energies, Energies 2014, 7, 6620-6644; doi:10.3390/en7106620 |
|||||||||
2014 |
|
|
Journal of Environmental Science and Engineering B, Vol 1, 8/2014, ISSN 1934-8932 |
|
||||||||
2014 | Airborne sound insulation of aluminum extrusion structural walls of an urban rail train | Xiaobo Liu,Ying Yang,Le Van Quynh | Noise Control Engr. J. 62 (1), January-February,, pp.47-53 | |||||||||
2014 | Vibroacoustic Analysis of a Rectangular Enclosure Bounded by a Flexible Panel with Clamped Boundary Condition, Shock and Vibration, | Yuan Wang, Jianrun Zhang, Le Van Quynh, | Volume 2014, Article ID 872963, 17 pages | |||||||||
2014 | Vietnamese recognition using tonal phoneme based on multi space distribution, | Nguyen Van Huy, Luong Chi Mai, Vu Tat Thang, Do Quoc Truong | Journal of Computer Science and Cybernetics, Vietnam, ISSN 1813-9663,Vol 30 No 1, Jan | |||||||||
2014 | Ellipsometric and XPS characterization of transparent nickel oxide thin films deposited by reactive HiPIMS | D.T. Nguyen, A. Ferrec, J. Keraudy, M. Richard-Plouet, A. Goullet, L. Cattin, L. Brohan, P.-Y. Jouan, | Surface & Coatings Technology, 250 (2014) 21–25. | |||||||||
2014 | Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating rapid resistan | Azdiar A. Gazder, Viet Q. Vu, Ahmed A. Saleh, Pavlo E. Markovsky, Pavlo E. Markovsky, Christopher H.J. Davies, Elena V. Pereloma, " | Journal of alloys and compounds,Volume 585, pp. 245–259, 5 February | |||||||||
2014 |
|
Thi Dieu Thuy Nguyen, Jiangjun Ruan, Quan Nhu Nguyen, Ngoc Giang Le, Dan Tan, Longfei Hu | TELKOMNIKA Indonesian Journal of Electrical Engineering, Vol.12, No.2, February 2014, pp. 1177 ~ 1187 | |||||||||
2014 |
|
Ngo Xuan Cuong, Do Nhu Y, Duong Hoa An, | Известия ТулГУ. Технические науки. Вып. 3 | |||||||||
2014 |
|
|
IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING IEEJ Trans; 9: 129 – 135 Published online in Wiley Online Library (wileyonlinelibrary.com). DOI:10.1002/tee.21947 |
|
||||||||
2014 | A Comparison of Microgrid Topologies Considering Both Market Operations and Reliability |
Minh Y. Nguyen and Yong Tae Yoon | Electric Power Components and Systems, 42(6):585–594, Copyright C Taylor & Francis Group, LLC ISSN: 1532-5008 print / 1532-5016 online DOI: 10.1080/15325008.2014.880963 |
|||||||||
2014 |
|
Nguyen Duy Cuong, Nguyen Van Lanh, Dang Van Huyen | Journal of Automation and Control Engineering, ISSN: 2301 - 3702, pp. 300 – 306 | |||||||||
2014 | An Adaptive LQG Combined With the MRAS - Based LFFC for Motion Control Systems | Nguyen Duy Cuong, Nguyen Van Lanh, and Gia Thi Dinh | Journal of Automation and Control Engineering Vol. 3, No. 2, April | |||||||||
2014 | Effect of the deposition conditions of NiO anode buffer layers in organic solar cells, on the properties of these cells | D.T. Nguyen A. Ferrec J. Keraudy J.C. Berne`de N. Stephant L. Cattin P.-Y. Jouan | Applied Surface Science, http://dx.doi.org/10.1016/j.apsusc.2014.05.020 | |||||||||
2014 | Hedge-algebra-based voltage controller for a self-excited induction generator |
Dinko Vukadinovića, Mateo Baöića, Cat Ho Nguyenb, Nhu Lan Vu, Tien Duy Nguyen |
Control Engineering Practice, | |||||||||
2014 | Generation of diamond wire sliced wafer surface based on the distribution of diamond grits | Chunhui Chung, Le Van Nhat | International Journal of Precision Engineering and Manufacturing | |||||||||
2013 | Identification of parameter correlations for parameter estimation in dynamic biological models, | P. Li, Q. D. Vu | BMC Systems Biology, 2013, 7:91. (SCI) | |||||||||
2013 | Profit optimization of steel shot blasting process, | Vu Ngoc Pi, Pham Hong Thai, Tran Quoc Hung, | Applied Mechanics and Materials Vols. 312 pp. 976-981 © Trans Tech Publications, Switzerland. | |||||||||
2013 | Cost optimization of external cylindrical grinding, | Vu Ngoc Pi, Phan Quang The, Vu Hong Khiem, Nguyen Ngoc Hương, | Applied Mechanics and Materials Vols. 312 pp. 982-989 © Trans Tech Publications, Switzerland. | |||||||||
2013 | Experiments on Vietnamese Folk Songs Content-based Searching based on Pitch Estimation | Phùng Thị Thu Hiền | International Journal of Advances in Computer Science and Technology | |||||||||
2013 | Current situation and development of vibration and noise from rail trains | LIU Xiao-bo1,LIU Jian1,LE Van-quynh2 | China Academic Journal Electronic Puslishing House | |||||||||
2013 | Design of a PD Controller Combined with a MRAS-based LFFC for a Two – Link Robot Manipulator |
Nguyen Duy Cuong1,a, Nguyen Van Lanh1,b, Dam Bao Loc1,c, Tran Que Son1,d and Ngo Minh Chu5 |
Applied Mechanics and Materials Vols . (541-542) pp 1102-1106 | |||||||||
2013 | A New Model Applied to the Distribution System Planning for Competitive Electricity Market | V. V. Thang, D. Q. Thong, B. Q. Khanh , | International Journal of Energy Engineering (IJEE), Dec, Vol. 3 Iss. 6, PP. 239-248 | |||||||||
2013 | Kinematic analysis of Persian joint using 3D rotation matrix, journal of environment science and engineering | Hoang Nguyen, Hoàng Vị; Vu Thi Lien, Tran The Long | Journal of Environmental Science and Engineering A 2, 70-775 Formerly part of Journal of Environmental Science and Engineering, ISSN 1934-8932 |
|||||||||
2012 | An analytic homogenisation model for shear–torsion coupling problems of double corrugated core sandwich plates; |
PTM Duong, B Abbès, YM Li, AD Hammou, M Makhlouf, YQ Guo | Journal of Composite Materials, Vol. 47(11), pp.1327–1341, 2012; |
|||||||||
2012 | Coordination control of multiple ellipsoidal agents with collision avoidance and limited sensing ranges |
Đỗ Khắc Đức | Systems & Control Letters, Vol. 61, No. 1, pp. 247-257 | |||||||||
2012 | Formation Control of Underactuated Ships with Elliptical Shape Approximation and Limited Communication Ranges |
Đỗ Khắc Đức | Automatica, Vol. 48, No 7, pp. 1380-1388 |
|||||||||
2012 | Formation Control of Multiple Elliptic Agents with Limited Sensing Ranges |
Đỗ Khắc Đức | Automatica, Vol. 48, No 7, pp. 1330-1338 | |||||||||
2012 | Formation control of multiple agents with preserving connectivity and its application to gradient climbing |
Đỗ Khắc Đức | International Journal of Computers, Communications & Control Vol. 7, No. 4, pp. 631-643 |
|||||||||
2012 | Global Tracking Control of Underactuated ODINs in Three Dimensional Space |
Đỗ Khắc Đức | International Journal of Control, pp. 1-14 | |||||||||
2012 | Flocking for multiple ellipsoidal agents with Limited Sensing Ranges |
Đỗ Khắc Đức | ISRN Robotics, pp. 1-13 | |||||||||
2012 | Determination of the Significance of Tolerance Parameters on Robot Performance Using Taguchi's Tolerance Design Experiment |
Đào Duy Sơn, Kazem Abhary | Journal of Applied Mechanics and Materials, Vols. 229 - 231; pp 2100 - 2105 |
|||||||||
2012 | Hybrid Genetic Algorithm Optimisation of Distribution Networks -A Comparative Study |
Đào Duy Sơn, Romeo Marian, Lee H. S. Luong | Chapter 9 in the book: “Intelligent Control and Innovative Computing” Published by Springer, New York, USA; 2012 |
|||||||||
2012 | Genetic Algorithms for Integrated Optimisation of Precedence - Constrained Production Sequencing and Scheduling |
Đào Duy Sơn, Romeo Marian | Chapter 6 in the Book: “Electrical Engineering and Intelligent Systems” Published by Springer, New York, USA; 2012 |
|||||||||
2012 | Optimisation of Resource Scheduling in VCIM System Using Genetic Algorithm |
Abhary and Romeo Marian, Dao Duy Son, Kazem | International Journal of Advanced Research in Artificial Intelligence Vol. 1(8) Issue 8 |
|||||||||
2012 | Energy Measurement of Bubble Bursting Based on Vibration Signals |
Lê Văn Quỳnh, Liu Xiao - Bo, Zhang Jian - Run, Li Pu | Chinese Physical Letters, Vol. 29, No. 6 | |||||||||
2012 | Interior acoustic field analysis of hydraulic excavator’s cabin based on BEM |
Lê Văn Quỳnh, Yuan Wang, Jianrun Zhang, Xiaobo Liu | Applied Mechanics and Materials, Vol. 141, pp. 323 – 327 |
|||||||||
2012 | Improving Constrained Clustering with Active Query Selection |
Vũ Việt Vũ, Nicolas Labroche, and Bernadette Bouchon - Meunier | Journal of Pattern Recognition | |||||||||
2012 | Language Learning Strategies Employed by EFL Science-oriented University Students in Vietnam: An Exploratory Study |
Dương Đức Minh, Intaraprasert, C | International Journal of Scientific and Research Publications Vol. 2(4), pp. 232-236 |
|||||||||
2012 | A Novel Spectral Conversion Based Approach for Noisy Speech Enhancement |
Đỗ H. Khôi, Phùng T. Nghĩa, Nguyễn Hữu Công, Nguyễn V. Tảo, Thái Q. Vinh |
International Journal of Information and Electronics Engineering Vol. 1, No. 3, pp. 281-285 |
|||||||||
2012 | Isolation, characterization and biological evaluation of a phenoxazine, a natural dyestuff isolated from the leaves of Peristrophe bivalvis |
Trịnh Thị Thủy, Nguyễn Thị Thanh Hương, Lê Thị Hồng Nhung, Phạm Thị Ninh, Domenico V Delfino, Trần Văn Sung |
Natural Product Research, iFirst, pp. 1-4 | |||||||||
2012 | Natural phenoxazine alkaloids from Peristrophe bivalvis (L.) Merr |
Trịnh Thị Thủy, Nguyễn Thị Thanh Hương, Trần Hoài Lam, Lê Thị Hồng Nhung, Phạm Thị Ninh,Nguyễn Thị Hoàng Anh, Trần Thị Phương Thảo, Trần Văn Sung | Biological Systematics Ecology, Vol. 44, pp. 205-207 |
|||||||||
2012 | A study on recycling of Supreme garnet in Abrasive Waterjet Machining |
Vũ Ngọc Pi, Hoang Van Chau, Tran Quoc Hung | Applied Mechanics and Materials Vol. 248 pp 499-503 © Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.248.499 |
|||||||||
2012 | A study on optimum calculation of partial transmission ratios of coupled planetary gear sets | Vu Ngoc Pi, Nguyen Thi Hong Cam, Hoang Vi | Applied Mechanics and Materials Vols. 275-277 pp. 2417-2420 © Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.275-277. 2417 |
|||||||||
2012 | Toward anode with low indium content as effective anode in organic solar cells |
Nguyễn Đức Tường | Journal Science Direct, Volume 258,Issue 7, 15, january 2012, pp 2844 – 2849. | |||||||||
2012 | Dielectric/metal/dielectric structures using copper as metal and MoO3 as dielectric for use as transparent electrode | Nguyễn Đức Tường, | Journal Science Direct, Volume 520,Issue 20, 01, August 2012, pp 6419 – 6423. |
|||||||||
2012 | Effect of the thickness of the MoO3 layers on optical properties of MoO3/Ag/MoO3 multilayer structures |
Nguyễn Đức Tường, | Journal of Applied Physics, Volume 112, Issue 6, 18, September |
|||||||||
2012 | Design and fabrication of the trapezoidal electrostatic comb-drive actuator , |
Pham Hong Phuc, Dinh Khac Tuan, Dang Bao Lam, Nguyen Tuan Khoa, Nguyen Tien Dung | Vietnam journal of Machanics, volume 34, Number 4, HaNoi, April |
|||||||||
2012 | Language Learning Strategies Employed by EFL Science-oriented University Students in Vietnam: AnExploratory Study |
Duong Duc Minh, | International Journal of Scientific and Rescarch Pulications, Volume 2, Issue 4, April | |||||||||
2012 | Application of bidirectional power converters to overcome some disadvantages of SVC substation |
Ngo Duc Minh and Le Tien Phong, | Journal of Energy and Power Engineering, volume 6, Number 12, December | |||||||||
2012 | Natural phenoxazine alkaloids from_Peristrophe bivalvis (L) Merr | Trịnh Thị Thủy, Nguyễn Thị Thanh Hương, Trần Hoài Lam, Lê Thị Hồng Nhung, Phạm Thị Ninh, Nguyễn Thị Hoàng Anh, Trần Thị Phương Thảo, Trần Văn Sung | Biochemical.Systematics and Ecology 44 205-207 |
|||||||||
2011 | Nonlinear dynamics of a new electro-vibro-impact system |
Jee-Hou Ho, Nguyễn Văn Dự, Ko-Choong Woo | Journal of Nonlinear Dynamics, Vol. 63, No. 1-2, pp. 35 - 49 |
|||||||||
2011 | A Study on Cost Optimization of Steel Shot Blasting Systems |
Vu Ngoc Pi, Phan Chi Chinh | Applied Mechanics and Materials Vols. 52-54 pp 568-572 © Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.52-54.568 |
|||||||||
2011 | Modeling and Optimisation of Precedence - Constrained Production Sequencing and Scheduling for Multiple Production Lines Using Genetic Algorithms |
Đào Duy Sơn, Romeo Marian | Journal of Computer Technology and Application, Vol. 2, No. 6 |
|||||||||
2011 | Vibration Analysis and Optimal Design for Cab's Isolation System of Vibratory Roller |
Lê Văn Quỳnh, Jianrun Zhang, Guowang Jiao, Xiaobo Liu, Yuan Wang | Journal of Advanced Material Research, Vol. 199, No. 200, pp. 936 - 940 . |
|||||||||
2011 | Nonlinear dynamic analysis of interaction between vehicle and road surfaces for 5 - axle heavy truck |
Lê Văn Quỳnh, Jianrun Zhang, Xiaobo Liu, Yuan Wang | Journal of Southeast University, Vol 27, No. 4, pp. 405 - 409 |
|||||||||
2011 | Practical Formation Control of Multiple Unicycle-Type Mobile Robots with Limited Sensing Ranges |
Đỗ Khắc Đức, M. Lau | Journal of Intelligent and Robotic Systems, Vol. 64, No. 2, pp. 245-275 | |||||||||
2011 | Relative Formation Control of Mobile Agents for Gradient Climbing and Target Capturing |
Đỗ Khắc Đức | International Journal of Control, Vol. 84, No. 6, pp. 1098–1114 |
|||||||||
2011 | Practical Formation Control of Multiple Underactuated Ships with Limited Sensing Ranges |
Đỗ Khắc Đức | Journal of Robotics and Autonomous Systems, Vol. 59, No. 6, pp 457-471 | |||||||||
2011 | Flocking for Multiple Elliptical Agents with Limited Communication Ranges |
Đỗ Khắc Đức | IEEE Transactions on Robotics, Vol. 27, No. 5, pp. 931-942 |
|||||||||
2011 | Global stabilization of three-dimensional flexible marine risers by boundary control |
Đỗ Khắc Đức | Journal of Ocean Systems Engineering, Vol. 1, No. 2, pp. 171-194 | |||||||||
2011 | Global Robust and Adaptive Output Feedback Dynamic Positioning of Surface Ships |
Đỗ Khắc Đức | Journal of Marine Science and Application, Vol. 10, No. 3, pp. 325-332 | |||||||||
2011 | Formation control of multiple elliptic agents with limited sensing ranges |
Đỗ Khắc Đức | Asian Journal of Control, DOI: 10.1002/asjc.447 | |||||||||
2011 | Communication and integrated NC and CNC machines with DNC system to expand application of CAD/CAM-CNC | D. X Truong, N.D Hoe, N.V. Du, L.T.T Hien, N.V Tan | Scientific journals of mechanical Engineering of Vietnam, No 4, April |
60. Đỗ Khắc Đức, B. S. Walsh, H. M. Sun, J. Pan, P. O’NeillJ, Analysis and reduction of blade passing noise of the Entecho Mupod, Journal of Ranasinghe Acoustics Australia, Vol. 28, No. 1 pp. 7 - 12, 2010
61. Đỗ Khắc Đức, Practical control of underactuated ships, Journal of Ocean Engineering, Vol. 37 pp. 1111 - 1119, 2010
62. Đỗ Khắc Đức, G. Seet, Motion Control of a Two - Wheeled Mobile Vehicle with an Inverted Pendulum, Journal of Intelligent and Robotic Systems, Vol. 60, No. 3 - 4 pp. 577 - 605, 2010
63. Đỗ Khắc Đức, Control of nonlinear systems with output tracking error constraints and its application to magnetic bearings, International Journal of Control, Vol. 83, No. 6 pp. 1199 - 1216, 2010
64. Đỗ Khắc Đức, Nguyễn Đăng Bình, Nguyễn Anh Đức, Control of Nonlinear Systems with Output Error Constraints, Journal of Measurement Science and Instrument, Vol. 1, No. 3 pp. 217 - 223, 2010
65. Đỗ Khắc Đức, Nguyễn Đăng Hào, Nguyễn Thị Thanh Bình, Nonlinear Control of Magnetic Bearings, Journal of Measurement Science and Instrument, Vol. 1, No. 1 pp. 10 - 16, 2010
66. Vu Ngoc Pi, Trần Minh Đức, A study on Multi - objective Optimization of Abrasive BlastingSystems, Journal of Advanced Materials Research, Vol. 126 - 128, 2010
67. Vu Ngoc Pi, Nguyễn Quốc Tuấn, A study on nozzle wear modeling in Abrasive Waterjet Cutting, Journal of Advanced Materials Research, Vol. 76 – 78 pp. 345 - 350, 2009
68. Vu Ngoc Pi, Profit Optimization of Abrasive Blasting Systems, Key Engineering Materials Journal, Vol. 389 – 390 pp. 392 - 397, 2009
69. Vu Ngoc Pi, Nguyễn Quốc Tuấn, Necessary cutting energy in Abrasive Waterjet Machining, Journal of Advanced Materials Research, Vol. 76 – 78 pp. 351 - 356, 2009
70. Đỗ Khắc Đức, Output - feedback formation tracking control of unicycle - type mobile robots with limited sensing ranges, Journal of Robotics and Autonomous System,Vol. 57, No. 1, pp. 34 - 47, 2009
71. Đỗ Khắc Đức, Control of Ships and Underwater Vehicles, Monographs, Springer 418 pages, 2009
72. E. D. Doyle, Y. C. Wong, Phan Quang Thế, S. Dowey, Challenges for exploitation of physical vapour deposition in metal cutting, International Heat Treatment and Surface Engineering Vol.3, No.4 pp. 165-170, 2009
73. Nguyễn Văn Dự Ko-Choong Woo, Nonlinear dynamic responses of new electro-vibroimpact system, Journal of Sound and Vibration, Vol. 310 , pp.769–775, 2008
74. Nguyễn Văn Dự Ko-Choong Woo Ekaterina Pavlovskaia, Experimental study and mathematical modelling of a new of vibro-impact moling device, International Journal of Non-Linear Mechanics Vol.43 , pp. 542 – 550, 2008
75. Nguyễn Văn Dự Ko-Choong Woo, New electro-vibroimpact system, Journal of Mechanical Engineering Science Vol. 222, No. 4. , pp. 629-642., 2008
76. Vu Ngoc Pi, Optimal calculation of partial transmission ratios of four-step helical gearboxes for getting minimal gearbox length, International Journal of Mathematical, Physical and Engineering Sciences (IJMPES), Vol.2, No.2 pp. 95-98., 2008
77. Vu Ngoc Pi, A study on optimal determination of partial transmission ratios of helical gearboxes with second-step double gear-sets, International Journal of Mathematical, Physical and Engineering Sciences (IJMPES), Vol.2, No.2 pp. 99-102., 2008
78. Đỗ Khắc Đức J. Pan, Boundary control of transverse motion of marine risers with actuator dynamics, Journal of Sound and Vibration, vol. 318, no. 4-5 pp. 768-791, 2008
79. Vu Ngoc Pi, Optimum determination of partial transmission ratios of three step helical gearboxes, WSEAS Transactions on Applied and Theoretical Mechanics, Issue 2, Vol. 1, February, ISSN 1991-8747, pp. 43-52., 2008
80. Vu Ngoc Pi, Optimal determination of partial ratios of three-step helical gearboxes with first and third step double gear-sets for getting minimal gearbox length, International Journal of Mathematics and Computers in Sumulations, Issue 4, Vol. 1, ISSN 1998-0159, pp. 323-326., 2007
81. Vu Ngoc Pi, A study on optimum calculation of the total transmission ratio of four-step helical gearboxes with first and third step double gear-sets, International Journal of Mathematics and Computers in Sumulations, Issue 1, Vol. 2, ISSN 1998-0159, pp. 103-108., 2007
82. Đỗ Khắc Đức Ge S.S C. H. Fua K. W. Lim, Multirobot Formations Based on the Queue-Formation Scheme With Limited Communication, IEEE Transactions on Robotics, Vol. 23, No. 6, pp. 1160 – 1169, 2007
83. Đỗ Khắc Đức J. Pan, Nonlinear formation control of unicycle-type mobile robots, Robotics and Autonomous Systems, Vol. 55, No. 3, pp. 191-204, 2007
84. Đỗ Khắc Đức, Bounded controllers for formation stabilization of mobile agents with limited sensing ranges, IEEE Transactions on Automatic Control, Vol. 52, No. 3, pp. 569-576, 2007
85. Đỗ Khắc Đức, Bounded Controllers for Decentralized Formation Control of Mobile robots with limited sensing, International Journal of Computers, Communications & Control, Vol. II, No. 4, pp. 340-354, 2007
86. Đỗ Khắc Đức, J. Pan, Robust path - following of underactuated ships: Theory and experiments on a model ship, Journal of Ocean Egineering, Vol. 33, No. 10 pp. 1354 - 1372,2006
87. Đỗ Khắc Đức, J. Pan, Underactuated ships follow smooth paths with integral actions and without velocity measurements for feedback: Theory and experiments, IEEE Transactions on Control Systems Technology Vol. 14, No. 2 pp. 308 - 322, 2006
88. Đỗ Khắc Đức, J. Pan, Global robust adaptive path following of underactuated ships, Journal of Automatica, Vol. 42, No. 10 pp. 1713 - 1722, 2006
89. Nguyễn Đăng Bình, Đỗ Khắc Đức, Formation Control of Mobile Robots, International Journal of Computers, Communications & Control Vol. I, No. 3 pp. 41-59, 2006
90. Đỗ Khắc Đức, Hoo E, J. Pan, An investigation on the lift force of a wing pitching in dynamic stall for a comfort control vessel, Journal of Fluids and Structures, Vol. 21, No. 8 pp. 707 - 730, 2005
91. Đỗ Khắc Đức, J. Pan, Global tracking of underactuated ships with non - zero off - diagonal terms, Journal of Automatica, Vol. 41, No. 1 pp. 87 - 95, 2005
92. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Robust and adaptive path following for underactuated autonomous underwater vehicles, Ocean Engineering, vol. 31, No. 16 pp. 1967-1997,2004
93. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, State and output feedback controllers for path following of underactuated ships, Ocean Engineering , vol. 31, No. 5-6 pp. 587-613, 2004
94. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, H. Nijmeijer, A global output-feedback controller for stabilization and tracking of underactuated ODIN: A spherical underwater vehicle, Automatica, vol. 40, No. 1 pp. 117-124, 2004
95. Đỗ Khắc Đức, J. Pan, Z.P. Jiang, Robust and adaptive path following for underactuated ships, Automatica, vol. 40, No. 6 pp. 929-944, 2004
96. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Simultaneous stabilization and tracking control of mobile robots: An adaptive approach, IEEE Transactions on Automatic Control, Vol. 49, No. 7 pp. 1147-1151, 2004
97. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, A Global output-feedback controller for simultaneous tracking and stabilization of mobile robots, IEEE Transactions on Robotics and Automation, Vol.20, No. 3 pp. 589-584, 2004
98. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Robust global stabilization of underactuated ships on a linear course: State and output feedback, International Journal of Control, vol. 76, No. 1 pp. 1-17, 2003
99. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Global tracking control of a VTOL aircraft without velocity measurements, IEEE Transactions on Automatic Control, vol. 48, No. 12 pp. 2212-2217, 2003
100. Đỗ Khắc Đức, J. Pan, Z.P. Jiang, Robust adaptive control of underactuated ships on a linear course with comfort, Ocean Engineering, vol. 30, No. 17 pp. 2201-2225, 2003
101. Đỗ Khắc Đức, J. Pan, Adaptive global stabilization of nonholonomic systems with strong nonlinear drifts, Systems and Control Letters, vol. 46, No. 3 pp. 195-205, 2002
102. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Universal controllers for stabilization and tracking of underactuated ships, Systems and Control Letters, vol. 47, No. 4 pp. 299-317, 2002
103. Đỗ Khắc Đức, Z.P. Jiang, J. Pan, Underactuated ship global tracking under relaxed conditions, IEEE Transactions on Automatic Control, vol. 47, No. 9 pp. 1529-1536, 2002
104. Bành Tiến Long, Phan Quang Thế, Nguyễn Đăng Bình, Wear mechanisms of pvd coated hss endmills using to machine 1045 hardened steel, Advanced Materials and Their processing – Proceeeding of the first Korea- Vietnam International Joint Symposium, Chung Nam National University November 4th – 5th pp. 164-172, 2002